Wednesday, October 29, 2008

HP LaserJet 2600 Series Cartridge Out Override

Avoid disposing of partially full HP color laser cartridges
One of my customers complained that the HP 2600 series printer will not print more than about 2000 pages with the black cartridge, even though it has plenty of toner left. The first symptom of actually running out of toner is smeary light gray band running down the page. Replacing the black cartridge clears up the poor print problem but at a considerable expense.
To avoid this unnecessary waste of toner and your money enable the ‘Cartridge Out Override’
HP LaserJet 2600 Series Cartridge Out Override
Cartridge Out Override can only be enabled from the printer's control panel menu.1. From the main menu, press (Right arrow) to System setup and press (Select).2. Press (Right arrow) to Print quality and press (Select).3. Press (Right arrow) to Replace Supplies and press (Select).4. Press (Right arrow) to Override out and press (Select).5. Press (Select).If Stop at out is selected, the printer will stop printing when a cartridge reaches the recommendedreplacement point. If Override out is selected, the printer will continue printing when a cartridgereaches the recommended replacement point. The factory default setting is Stop at out.
Use on these printers:
HP Color LaserJet 1600 Printer; HP Color LaserJet 2600n Printer; HP Color LaserJet 2605 Printer; HP Color LaserJet 2605dn Printer; HP Color LaserJet 2605dtn Printer ;HP Color LaserJet CM1015 MFP; HP Color LaserJet CM1017 MFP

3 comments:

Anonymous said...

Thank you. This helped me. Best regards. Mike.

Anonymous said...

worked great helped me out of a bind thanks!!

Anonymous said...

Helped me as well.